Garage door torsion springs help lift the door’s weight, making it easily open and close. When they break, your garage door stops working and creates safety concerns. So, how much to replace a torsion spring on a garage door? In 2025, costs vary by spring type, door size, and labor, but knowing average prices helps you prepare.
Most people pay between $150 and $350 to replace a standard torsion spring, including parts and labor. Heavy doors or dual-spring setups may cost more. Emergency repairs usually raise the total price. Act quickly if your door does not open or makes loud popping sounds. This guide covers the full cost breakdown, warning signs, and tips to help you save on repairs.
What is a Torsion Spring and Why Does It Matter?
A torsion spring is a tightly wound metal coil that helps lift and lower your garage door. It holds energy as it twists, making the door move smoothly. Unlike extension springs that stretch, torsion springs sit above the door opening. They last longer, give better control, and are common in modern garage door systems today.
Garage door torsion springs usually last for 10,000 to 20,000 cycles, which equals about 7 to 14 years under typical daily use. When they wear out, the door may get stuck or slam shut. Knowing your garage door spring’s lifespan helps you avoid surprise breakdowns and plan for a safe, working garage door mechanism.
Typical Price Range for Garage Door Torsion Spring Replacement in 2025
How much to replace a torsion spring on a garage door? That’s one of the most common questions homeowners ask when their garage door suddenly stops working. Let’s break down what affects the price in 2025.
National Averages
Most homeowners spend $150 to $350 for a single garage door torsion spring replacement. This covers both parts and labor, with the final price depending on the type of spring and size of the garage door.
If your garage has double springs, expect to pay $200 to $500, depending on the weight of the door and the type of springs installed.
Garage Door Size and Weight
Larger or heavier garage doors need more durable springs, which usually come with a higher price due to the added strength required. The larger the door, the more pressure the springs handle, raising your spring replacement price.
Spring Quality and Brand
Higher-quality springs, like galvanized or high-cycle options, cost more upfront but last longer. Investing in a better spring can lower future garage spring repair costs.
Regional Labor Rates
Labor costs vary by region. Some areas charge more due to demand or service availability, affecting the total garage door service cost for spring replacement.
Additional Repairs
You might pay more if the technician finds worn cables, bearings, or drums. These parts often wear out together, so checking everything is smart.
Garage Door Torsion Spring Replacement Cost Breakdown
Understanding what goes into the total price makes it easier to plan your budget. This breakdown shows the typical parts, labor, and full cost of replacing garage door torsion springs.
| Cost Item | Details | Estimated Price |
| Torsion Spring | Standard spring based on size and cycle rating | $30 – $100 |
| Supporting Parts | Includes cables, center bearings, and drums if needed | $20 – $50 |
| Labor Hourly Rate | Most garage spring service pros charge per hour | $75 – $150 per hour |
| Time Needed | Labor time to remove and install new springs | 1 to 2 hours |
| Single Spring Replacement | Full cost, including labor and all standard parts | $150 – $350 total |
| Double Spring Replacement | Common for heavy garage doors with two springs | $200 – $500 total |
These prices reflect the hardware and labor needed to safely replace torsion springs. Planning helps avoid surprise garage door repair costs and ensures a smooth, affordable fix.
DIY vs. Professional Torsion Spring Replacement
Thinking about fixing your garage spring to save money? It might seem easy, but there are serious safety risks you need to know about first.
Torsion springs hold a lot of pressure. If they snap during repair, they can cause deep cuts, broken bones, or worse. Replacing a garage spring on your own is not a safe task during the weekend.
Here’s why hiring a garage door technician is usually the better choice:
- Safe Work: Garage door technicians handle high-tension springs every day. They have the right tools and experience to complete the job without injury or risk.
- Proper Balance: An unbalanced torsion spring puts extra strain on your garage door opener and may cause the door to shake, jam, or wear out early.
- Warranty Protection: Many professional garage door spring repair services include warranties. This means future issues with parts or labor may be fixed at no extra charge.
Fixing springs by yourself might save a little money. But regarding safety and long-term results, calling a trained professional is the more brilliant move.
Signs That Your Torsion Spring Needs Replacement
Are you unsure whether a damaged torsion spring is the reason your garage door is not working? These signs will help you catch the problem early and avoid bigger repairs.
Door Will Not Open or Stops Halfway
If your garage door will not open or gets stuck halfway, the spring may have lost its tension and can no longer support the door’s weight.
Loud Bang or Snap Sound
A loud popping noise, often mistaken for something falling, could be your garage spring snapping and releasing built-up tension in one quick motion.
Door Looks Crooked or Slants
While moving, a crooked or slanted garage door usually means one spring is broken, causing uneven pressure and unsafe movement during opening or closing.
Visible Gap in the Spring
Check for a visible gap in the middle of the coil. A broken garage door spring often separates where the metal has snapped.
Opener Struggles or Fails
If your garage door opener is straining or not working at all, it may be overcompensating for a spring that no longer supports the door.
If you notice any of these signs, stop using the door immediately and call a garage door technician to avoid further damage or higher repair costs.
Tips to Save Money on Torsion Spring Replacement
Torsion spring repairs do not have to cost a fortune. These simple tips can help lower your total garage spring replacement cost and avoid extra fees.
1. Get Multiple Estimates
Call a few local garage door repair companies to compare prices. Some charge more than others, so checking around helps you get the best deal.
2. Replace Both Springs
When one spring fails, the other is often not far from wearing out as well. Replacing both can lower future garage door spring replacement costs and save on labor.
3. Schedule Regular Tune-Ups
Having your garage door serviced once a year helps spot small problems before they turn into bigger, more expensive repairs. This keeps your system in good shape and helps avoid costly spring failures later.
4. Ask About Warranties
Some services include a spring repair warranty that covers future issues. Always ask if any kind of guarantee backs parts and labor.
A little planning goes a long way. By making smart choices, you can cut costs and keep your garage door working longer.
Frequently Asked Questions
Can I replace just one torsion spring?
While it’s possible to replace only one torsion spring, it’s usually best to replace both for better balance and long-term performance. Doing so balances your garage door and helps prevent another spring failure shortly, saving time and money.
Is it safe to replace a torsion spring myself?
No, DIY spring replacement is dangerous. Torsion springs are tightly wound and can cause serious injury if they snap. Hiring a garage door technician with proper tools and experience is always safer.
What factors affect the cost of torsion spring replacement?
Spring replacement costs vary based on the size of your garage door, the type and quality of the spring, and local labor charges. Replacing worn cables, bearings, or drums may incur extra fees during the service.
How do I make garage door springs last longer?
To protect your garage door springs, apply silicone spray every 3 to 6 months, check for rust or gaps, and avoid slamming the door. Good garage door maintenance can add years to their life.
Conclusion
If you ask how much it costs to replace a torsion spring on a garage door, plan to pay between $150 and $350 for a single spring. If you need two, the total can reach about $500. Knowing the cost helps you plan and avoid expensive emergency repairs later.
A broken spring can stop your garage door from working and even lead to injury. Letting a trained expert handle the job keeps your home safe and your door working properly. At JT’s Overhead Doors, we deliver honest pricing and dependable service you can count on.
If your garage door has a broken spring or is stuck, quick help is available. Choose JT’s Overhead Doors for reliable garage door repair in Mesa, AZ. We offer expert inspections, clear quotes, and quality repairs that last. Call us today to book your service and get your door back on track.
End Note
Need expert garage door help you can trust? Visit JT’s Overhead Doors to explore our full list of services, including garage door repair, spring replacement, and maintenance plans that keep your system working longer. We’ve got you covered, whether it’s a noisy door or a broken spring.
Are you looking to upgrade or customize your garage setup? Check out our garage door options, like Safeway, and trust our openers for smooth daily use. We also offer complete garage door service with reliable support across our service areas. Visit our About Us page to get to know our background.
Want to see our work in action? Visit the project gallery, read tips on our blog post, and grab our latest coupons for repair deals. Stay connected through Instagram and Facebook, or reach out directly on our Contact Us page to book your service today.
JT’s Overhead Doors
2449 E Lindrick Dr, Gilbert, AZ 85298, United States
480-662-3315
